Inkjet Clear Glossy Photo Quality Stock
Product Description
(Clear/Permanent Adhesive/50# Liner)
Face Stock
A 1.5 mil clear glossy polyester Ink Jet face stock. In addition to exceptional imprint ability, this face material combines very good clarity with excellent heat resistance and durability.
Basis Weight: N/A Caliper: 0.0015 inches ± 10% Tensile: MD 30,000 psi CD 30,000 psi Tear: N/A Stiffness: N/A
Adhesive is a general purpose permanent adhesive with good adhesion to many substrates, particularly corrugated. The adhesive is resistant to high temperatures from laser printers.
| Type: | Emulsion Acrylic |
| Minimum Application Temperature: | +25ºF |
| Service Temperature Range: | -65ºF to + 200ºF |
50# liner is a coated stock that adds to the overall stability of the total construction.
| Basis Weight: | 50# per ream ±10% |
| (500 sheets 24” x 36”) | |
| Caliper: | 0.0034 inches ±10% |
| Tensile: | MD 25# per inch width |
| CD 13# per inch width | |
| Tear: | MD 60 grams per sheet |
| CD 75 grams per sheet |
Total Construction Caliper: 0.0056 inches ± 10%
Typical Performance Data: 50# uncoated paper at room temperature on standard lab panels
| Material | Loop Track | Peel Adhesion |
| Stainless Steel | 3.7 lbs | 1.7 lbs-tear |
| Glass | 3.7 lbs | 2.2 lbs-tear |
| Recycled Corrugated | 1.9 lbs-Pulled Fiber | 1.4 lbs-tear-Pulled Fiber |
| Polypropylene | 2.9 lbs | 1.3 lbs-tear |
| Treated HDPE | 3.2 lbs | 1.8 lbs-tear |
Printing/Converting
This product can be printed using most flexographic film inks and it has been die-cut and stripped at high speeds on standard web-fed presses.
Application and Uses
This product has been designed to be compatible with most common sheet fed desktop inkjet printers. The product is suitable for a wide variety of labeling applications including but not limited to: mass customized labeling, shipping labels, address labels and compact disk (CD) labeling.
